Midvale Foundation Pros logoMidvale Foundation ProsFoundation Repair · Midvale, UT
Concrete Lifting photo

Midvale Foundation Pros

Concrete Lifting in Midvale, UT

Concrete lifting in Midvale using polyurethane foam injection. Same-day lift for sunken slabs, free estimates, no mudjacking mess.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Midvale and nearby communities.

Sunken slabs don't fix themselves. Most of the time the void under a driveway, patio, or sidewalk slab only grows as water keeps washing soil out from underneath it. Midvale Foundation Pros lifts settled concrete with polyurethane foam injection instead of the old mudjacking slurry method. Smaller holes, faster cure time, and a lighter fill that won't add more weight to already-soft soil.

Salt Lake Valley's mix of clay and sandy soil compacts unevenly after heavy snowmelt and freeze-thaw cycling, and that's usually what's driving the sink in the first place. We diagnose the void before we fill it, so the lift holds instead of settling again next season.

What's included

What's included with Concrete Lifting

Typically included: slab assessment, dime-sized access hole drilling, polyurethane foam injection, elevation checks during the lift, hole patching.

Optional: joint resealing, surface sealant application, multi-slab leveling for connected sections.

Customer prep: clear furniture or planters off the slab and move vehicles away from the work area beforehand.

How it works

How our Concrete Lifting process works

  1. Surface Assessment photo
    Step 1

    Surface Assessment

    Uneven or sunken concrete areas are identified and measured.

  2. Drilling Access Holes photo
    Step 2

    Drilling Access Holes

    Small holes are drilled into the concrete to allow material injection.

  3. Material Injection photo
    Step 3

    Material Injection

    Expanding foam is injected beneath the slab to raise it evenly.

  4. Elevation Monitoring photo
    Step 4

    Elevation Monitoring

    Lift progress is measured to achieve the desired level.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access holes are filled and finished to match the surrounding surface.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The lifted area is reviewed for levelness and stability.

Materials

Materials and methods for Concrete Lifting

  • Polyurethane Foam photo

    Polyurethane Foam

    Expands beneath slabs to lift and stabilize concrete surfaces, holding up well against Midvale's freeze-thaw swings without breaking down.

  • Injection Ports photo

    Injection Ports

    Allow controlled placement of lifting material under the slab so we can target the exact low spot.

  • Patch Compound photo

    Patch Compound

    Fills drilled access holes for a smooth finish that blends with the surrounding concrete.

  • Surface Sealant photo

    Surface Sealant

    Protects the repaired area from moisture and staining, extending the life of the lift.

  • Leveling Gauge photo

    Leveling Gauge

    Used to measure and confirm slab elevation during lifting, so we don't overcorrect.

  • Bonding Agent photo

    Bonding Agent

    Improves adhesion between new patch material and existing concrete for a durable repair.

Timeline

How long does a Concrete Lifting take?

Most concrete lifting jobs wrap in a single visit. The slab is usable again within a few hours of the foam curing.

  1. 01

    Consult and assessment

    same day
  2. 02

    Drilling and injection

    1–2 hours

    per slab

  3. 03

    Cure time before use

    a few hours

  4. 04

    Patch finishing

    same visit

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Concrete Lifting

Permit rules shift block to block. Check with Salt Lake County before scheduling if your project overlaps structural repair.

Typically needs a permitOften no permit
Lifting work tied to a structural addition or attached to a permitted foundation repairStandard driveway
—patio
—or walkway slab lifting
—Foam injection under residential concrete not tied to structural work

DIY vs pro

DIY vs hiring a pro for Concrete Lifting

DIYHire a pro
Minor cosmetic crack filling on the surfaceAny slab showing more than an inch of settlement
Resealing expansion joints after a professional liftInjection work, since pressure control determines whether the lift is even or cracks the slab further
Patching small chips that don't affect slab levelDiagnosing whether the void is from erosion, a broken pipe, or soil compaction

Before & after

Before and after Concrete Lifting

  • Concrete Lifting photo
    Before
  • Concrete Lifting photo
    After

FAQs

Concrete Lifting FAQs

What's the difference between polyjacking and mudjacking?

Polyjacking uses lightweight polyurethane foam that cures in minutes and doesn't add much weight to the soil underneath. Mudjacking uses a heavier cement slurry that takes longer to cure and can add stress to soil that's already settling.

How much does concrete lifting cost in Midvale?

Most jobs run a few hundred to a couple thousand dollars depending on slab size and how much foam is needed to fill the void. We give a firm number after seeing the site.

Will the lifted slab sink again?

It shouldn't if the original cause of settlement (usually erosion or soil compaction) was addressed during injection. We check for drainage issues as part of the assessment.

Is concrete lifting faster than replacement?

Yes. Most lifts finish same-day versus a multi-day tear-out and repour for full replacement.

Can you lift a slab that's cracked?

As long as the crack isn't so wide the slab has separated into unstable pieces. We'll tell you honestly if replacement makes more sense.

Do I need to move my car or furniture first?

Clear the slab area so we have full access to drill and inject.

Next step

Get a Concrete Lifting estimate in Midvale

Call (385) 557-8453 or request a free estimate and we'll take a look at what's sinking and why.

Ask about Concrete Lifting

Tell us about the project and how to reach you.

Call (385) 557-8453